Paver Sealing

paver sealing. Finest Touch Paintings and  is your ultimate choice for quality service on new and existing pavers. We use the most cutting edge state-of-the-art sealers and the best application techniques to help protect your investment and restore the beauty of your paver hardscape.

  • Concrete Paver Restoration and Sealing
  • Pool deck cleaning and sealing
  • Driveway cleaning and sealing
  • Paver Stripping/Cleaning Services
  • Waterproofing
  • Residential & Commercia







Read these helpful tips

The work of landscapers (and any other maintenance personnel) should not be done on the day of sealing.
If their equipment normally drives over the pavers, reschedule them to come TWO DAYS AFTER sealing to allow for sufficient “curing” time. NOTE: Advise landscapers NOT to make tight turns on sealed pavers in order to prevent tire markings from their riding equipment.

Remove furniture, plants, and any other movable decorative items from any area being cleaned and sealed.
Pool maintenance service should not be done on the day of sealing. Regular pool maintenance can be performed the day after the sealing to remove any sand or debris from the pool and filters.

If we seal pool area, the water may get slightly cloudy from the sealer. This will dissipate within 24 hours. The sealer will not harm the pool or stick to any components. You may swim in your pool the next day.
Turn off your sprinkler system on the day before and the day of your pavers are being cleaned and sealed. If sanding, pavers need to be dry to insure good point penetration.
Make sure all automobiles that will need to be used are out of the garage and not on the paver area that is to be cleaned and sealed.

If you are not home the day of cleaning and sealing and when garage doors close on the pavers, make arrangements with your sealing technician to be sure that garage doors will be left open if you want that area sealed.
The paver surface can be opened to foot traffic 4 - 6 hours after cleaning and sealing is completed.

Although our sealer can be applied to damp pavers, paver sealer takes up to 1-2 hours to attach to the paver surface after sealing. If rain occurs within the hour after sealing, please notify Paver Pro so we may inspect for washout.
The paver surface can be opened to vehicular and lawn maintenance traffic 48-72 hours after the cleaning and sealing are completed. To prevent tire markings, do not make any tight turns or sudden stops.
You may replace furniture, plants, and any other decorative items on the paver surface the next day.

Sealing maintenance recommended every2 to 3 years

Print Friendly, PDF & Email